Living Room #3 Fireplace Fiddling

Firstly these recent posts are real time – finished just a day or two ago. The weather and waiting for a plumber keep other projects from advancing.

We’re still in test-fit mode here at MisAdventures. I may not have a plan on paper, but it’s up here in my head somewhere. Even through formal plans are non-existent I just don’t run roughshod willy-nily with stone and wood – no, I do a lot of “what-if” test fits.

1 gas lineThe cabinet boxes had to be smaller than the face frames to allow gas pipe and electric to be run to the fireplace. This side will have the gas – the other side will have the electric. This pipe has to go up and into the firebox. No – that valve will not be at this position. Originally, this valve was inside the fireplace – and that’s allowed by our local code. Not a good idea in my opinion, so we will have a shut off valve under the floor with a key next to the fireplace. We’ll know the layout when my plumber shows up.

2 fireplace 1st fitThe first test fit of the fireplace insert. It’s a Regency L390E Direct Vent gas – and I already see a problem. The specifications show the width without that little box attachment on the left side. It’s an optional remote control module and it doesn’t allow the fireplace to sit centered.

3 fireplace notch start So out comes the diamond saw and we start making some more brick dust – and I thought I was done with this dirty stuff.

4 fireplace fit after notchAfter the notch I thought I might be done with the saw – but I think I’ll have to notch the top a little more because I have a new hearth going in over the original limestone hearth. Why would I cover up this vintage hearth you say? Well, I wanted to keep it – since I added limestone outside. But the hearth is pretty poor in the craftsmanship department. The right side is 1 1/2″ wider than the left side. It has pretty poor joints and really filthy stone. I sanded some and thought about taking it up and resetting it. But really – it looks like concrete.

5 fireplace with surroundBut after thinking about the big picture I have decided to add a honed black granite hearth to match the matte black fireplace surround. I’ll build a mantle and wrap the corners with casework. (Those sticks of wood are my substitute for a CAD drawing). The surround between the fireplace face and those vertical sticks  will be white marble and the tops of the cabinets flanking the fireplace will have matching marble tops.

6 living room at nightSo this is where we are right now. You see I used the original cabinet doors for the design theme for all the exterior windows in the house – all 24 of them. This room is 13’X18′ and the 9′ ceiling has 8 low voltage recessed lights.The wall color will be white – another white on white room. There is a lot of art going in here so the lights are fully articulated to effectively light the paintings. A vintage chandelier will go in the middle.

So as I wait for the plumber to fit the fireplace and get the stone guys moving -hang in there we’ll get this room semi-finished and move on to the next.

 

Advertisements